Amana washer error codes: An Introduction
Amana washers come with error codes, giving you hints of any issues that may have arisen during the wash process. Here are some of the common ones, their meanings, and potential solutions.
| Error Code | Meaning | Solution |
|---|---|---|
| F1 | Water supply issue | Check hoses for kinks or blockages. |
| F9 E1 | Long drain time | Remove any blockage in the drain hose. |
| F5 E3 | Door lock issue | Replace the door lock assembly. |
Note: Error codes may vary from model to model. Check the user manual for specifics.
Plus, Amana washers have diagnostics modes for testing purposes. Automatic Test, Manual Diagnostic Test, and Service Mode – all with instructions in the user manual.
Pro Tip: Regular maintenance is key to preventing error codes. Clean the inside of the washer drum with vinegar and water every few months to avoid build-up and odors.
Understanding Amana washer Error Codes
To understand Amana washer error codes and fix them yourself, you need to identify the common error codes that your machine displays. This way, you will know what causes the error codes, and troubleshooting the machine will be more manageable. So, let’s delve into the two fundamental sub-sections: identifying common error codes and understanding the causes of error codes.
Identifying Common Error Codes
When using Amana Washers, it’s important to understand the various error codes. Knowing how to identify these common codes can help you troubleshoot any issues and keep your washer running efficiently.
To help with this, we’ve created a table of the most common errors and their meanings:
| Error Code | Meaning |
|---|---|
| LF | Long Fill |
| Ld | Lid Open |
| F9 | Drain Problem |
| Sud | Excessive Soap |
It’s important to pay attention to these as they indicate issues with the components. Not all models will display the same errors though, so if troubleshooting a problem, refer to the user manual.
Before attempting any repairs on the washer, remember to disconnect it from its power source. Otherwise, there could be serious injuries or death.
For example, one customer had a continuous LF error code. This means a long fill and prevents the cycle from continuing. The water supply valve was turned off, so the technician re-opened it and it started working again.
It’s essential to understand Amana Washer Error Codes for regular use. Knowing them can save money on technicians or replacement parts. Who knew one error code could have so many causes?
Understanding the Causes of Error Codes
Getting an error code on your Amana washer? It’s important to know the causes. These may include electrical faults, mechanical problems, faulty sensors, clogging or blockages in the drainage and water supply, and software glitches.
Remember, different codes mean different issues. For instance, if the door isn’t closed or the cycle was stopped suddenly, an error code may show. Resetting it by unplugging it for a few minutes could help.
If it’s too hard to figure out why it’s giving an error code or DIY methods fail, get expert help.
Pro Tip: Save your Amana washer’s manual and warranty info. It can help you choose the right repair options and keep it running well.
Troubleshooting Amana Washer Error Codes
To troubleshoot Amana washer error codes with various troubleshooting codes like F1 or F2, F3 or F4, F5 or F6, F7 or F8, F9 or F10, F11 or F12, F13 or F14, and F15 or F16, you need to understand the reasons behind the errors and the solutions available for each code.
Troubleshooting Code F1 or F2
Got error codes F1 or F2 on your Amana washer? Don’t stress – just follow these steps:
| Step | Action |
|---|---|
| 1 | Cut the power: Unplug the washer. |
| 2 | Check the wiring: Open the control panel and make sure all wires are tight and undamaged. |
| 3 | Reset the board: Press and hold the cancel button for three seconds. |
| 4 | Replace the board: If nothing works, replace the control board. |
| 5 | Call a technician: If you can’t fix it, call an authorized technician. |
Remember, these codes usually point to control board or wiring issues. Regular maintenance can also help prevent errors. Clean the lint filter after every use and use high-quality detergents designed for washing machines. With the right care, you can keep your Amana washer running for years!
Troubleshooting Code F3 or F4
When your Amana washer flashes a code F3 or F4, it means there’s a problem with the temperature sensor. This could cause some performance issues, so it’s best to tackle it right away.
To fix F3 or F4:
- Unplug the washer and wait 1 minute.
- Check the temperature sensor is connected correctly in the control panel.
- If that doesn’t work, you may need to replace the sensor.
If you do all this and your Amana washer is still misbehaving, it’s time to call a pro.
It’s always a good idea to read the user manual for your model, as the troubleshooting instructions may vary slightly.
For more tips and tricks on Amana washers, or for more appliance advice, browse our articles.
Troubleshooting Code F5 or F6
Tackle F5 or F6 codes on your Amana washer with these steps:
- Turn off the power and unplug it.
- Check wiring connections on the main control board for any damage or looseness. Tighten or replace as necessary.
- Check the motor tachometer wire for any breaks or damage, secure it if needed.
- If all connections are ok, replace the main control board.
- If the issue persists, swap out the motor too.
Paying attention to these components is key. You should be able to fix most F5 or F6 code issues with these steps.
Cleaning your washing machine regularly can keep malfunctions away. Consumer Reports says more than half of washing machines get better after five years of usage, if maintained properly.
Troubleshooting Code F7 or F8
If you spot error codes F7 or F8 on your Amana washer, it’s a sign of a problem with the motor’s speed reference. Causes could be a damaged wiring harness, a faulty drive motor, or a defective motor control board.
So, here’s how you can troubleshoot:
- Switch off the washer and unplug from the power source to reset the control board.
- Check the wiring harness that connects the drive motor and motor control board for damage. If so, replace it.
- If no visible damage, use a multimeter to test each wire for continuity. If there’s none, replace the wiring harness.
- Test the drive motor. If it’s not working, replace it.
- If the wiring harness and drive motor are okay, most likely the motor control board needs replacing.
- Plug in the washer again and check if the error codes still appear.
Also, do proper maintenance for your Amana washer to prevent future issues. When F9 or F10 is displayed, it means there’s a drain pump issue.
Troubleshooting Code F9 or F10
Troubleshooting Amana Washer Error Codes can be tricky, like when you get F9 or F10. Here’s what to do:
- Check the Drain Pump. This code usually means there’s a clog. Turn off the washer and unplug it. Find the pump. See if anything is blocking it. Clear it. Then, plug it back in and restart.
- Inspect the Hose. A kinked or blocked hose is another cause. Check all hoses connected to the pump. Straighten bent hoses. Replace damaged ones. Remove anything inside that’s blocking.
- Verify the Pressure Switch. If none of that works, test the Pressure Switch Control Board. Disconnect power first. So you don’t get a shock while testing the live fiber-optic circuit.
Remember: this code often means water won’t drain. If these solutions don’t help, get professional help or read the Instruction Manual. Since 1930, George Foerstner’s Electrical Equipment Co. has been making Amana – an efficient washer that conserves energy and gets clothes clean. F11 and F12? Just call your therapist!
Troubleshooting Code F11 or F12
Your Amana washer’s Code F11 or F12 display? Sounds like it’s time to troubleshoot. Unplug the washer, then use a multimeter to test the wires between the central control unit and the door lock assembly. Check the lock for wear and tear, and inspect the wiring harness between the two. Reconnect any loose wiring or replace any damaged wires. Plug it back in and see if the code clears.
If not, refer to the user manual or contact Amana customer service. Other users have reported needing to replace the control unit to resolve the issue. So remember to maintain and repair your machine for optimal performance.
Troubleshooting Code F13 or F14
If your Amana washer is displaying Code F13 or F14, it indicates a problem with the dispenser circuit. This could be due to wiring issues, a defective motor control board, a faulty water inlet valve, or a damaged motor.
To troubleshoot this yourself:
- Unplug the washer.
- Check connections between the motor control board and the dispenser, making sure all wires are secure.
- If problems persist, replace the motor control board.
If this seems too daunting, reach out to a professional for help. Remember, F13 indicates Overfill, while F14 represents Underfill. These codes appear when too much or too little detergent is detected.
On average, washing machines have a lifespan of 10 years. To get the most out of your appliance, stay on top of maintenance and repair.
Troubleshooting Code F15 or F16
Amana washers displaying F15 or F16 error codes? No problem! Here’s a guide to help you fix it:
| Step | Description |
|---|---|
| 1 | Unplug the washer from the power source. |
| 2 | Refer to the owner’s manual to locate the motor control unit. |
| 3 | Check all wiring connections to make sure they’re secure. |
| 4 | Replace any components that appear damaged or corroded. |
| 5 | Plug it back in and run a test load. |
Remember: this guide is only for Amana washers. Other brands may require different troubleshooting methods for similar error codes.
F15 or F16 codes can cause your washing machine to act up, making daily chores a hassle. Amana Corporation has been around since 1934, based in Iowa, USA. Get your washer running again and say goodbye to error codes with these simple tips!
Fixing Amana Washer Error Codes
To fix Amana washer error codes with the following sub-sections as a solution: fixing error codes F1 or F2, fixing error codes F3 or F4, fixing error codes F5 or F6, fixing error codes F7 or F8, fixing error codes F9 or F10, fixing error codes F11 or F12, fixing error codes F13 or F14, and fixing error codes F15 or F16.
Fixing Error Codes F1 or F2
F1 or F2 error codes on your Amana Washer? It means the main control board has a problem. To fix it:
It’s very important to follow these steps correctly. Otherwise, more damage may occur. If replacing parts doesn’t help, it may be due to a short circuit in wiring. So, get help from an Amana technician or electrician. Plus, QualitySolicitors has warned against certain manufacturers after safety tests set some models alight. Don’t worry, we’ll help you decode the washer’s Morse code.
Fixing Error Codes F3 or F4
Malfunctions associated with codes F3 or F4 on Amana washing machines can be resolved in six easy steps. Shut off the machine and turn off the water supply valve. Inspect inlet hoses for any blockages or kinks. Replace them if needed. Take apart the water connection on the back and remove debris from the screens in either valves. Reinstall parts and restart the appliance. Check solenoids and continuity between each terminal to diagnose the issue. Finally, securely connect all removed parts and test with a laundry cycle.
To avoid future malfunctions, clean filters and check connectors regularly. For example, a homeowner found their appliance displaying error code ‘F4’ due to utility hooks snagged on internal mechanisms. Removing said clothing solved the problem. If your Amana washer has F3 or F4 codes, follow these steps to get it running again.
Fixing Error Codes F5 or F6
Amana Washers may experience F5 or F6 Error Codes. This means the machine door isn’t locked correctly. To fix these codes, take these 4 steps:
With these steps, you can diagnose and fix the error code quickly.
However, voltage fluctuations and power surges can also trigger these codes. Protect your washer by plugging it into a dedicated electrical circuit with surge protection.
Amana Washer owners have had similar issues. Often, they’ve fixed it temporarily, before realizing that a new lock assembly was needed. Some even replaced all their electrical components before fixing the problem!
Fixing Error Codes F7 or F8
No need to think too hard on what F7 or F8 codes mean in an Amana washer. First, switch off and unplug the machine. Wait a bit before turning it back on again. If the code still lingers, then proceed with these steps:
| Step | Solution |
|---|---|
| 1 | Check the wiring harness connections of the motor and control board. |
| 2 | Measure the resistance of each motor winding with a multimeter. |
| 3 | Look for any mechanical binding or obstruction in the tub or agitator. |
| 4 | Change sensors, switches, and control boards after testing. |
| 5 | In rare cases, call in a pro for further troubleshooting. |
Remember: some Amana code troubles may be due to user errors, such as overloading or too little water supply. These can be easily fixed with better awareness on how to use the appliance.
On the other hand, if the issues go unchecked, it can lead to serious damage. This can raise energy bills due to faulty operations. Get quick help to keep your Amana washer running optimally and save yourself from costly repairs!
Fixing Error Codes F9 or F10
Your Amana washer shouting F9 or F10? No need to worry – it’s just a communication error between the control units. Here’s how to fix it:
| Step | Action |
|---|---|
| 1 | Unplug the washer from the electrical outlet. |
| 2 | Check for loose wires in the motor control unit and the central control unit. |
| 3 | Ensure all connectors are securely fastened. |
| 4 | If no loose wires, replace the motor control unit. |
| 5 | If replacing the motor control unit doesn’t help, replace the central control unit. |
| 6 | Plug in the washer back & test. |
Plus – errors can also be caused by water pump or drain hose problems!
Fun Fact: The first Amana washing machine was launched way-back-when in 1967 by Amana Corporation. Whirlpool Corporation took over in 2006.
Fixing Error Codes F11 or F12
Got F11 or F12 error codes on your Amana washer? Here’s what to do:
- Unplug it from the power outlet for 30 secs.
- Plug it back in and check if it works.
- If not, check the connections and wiring.
- If still not, consider replacing either the central control unit or motor control unit, depending on which one has failed.
- Inspect any wiring that looks frayed or damaged.
- If all else fails, contact a technician for help.
F11 and F12 are Amana washer-specific errors. Consumer Reports rates Amana washers as “Good” for reliability.
Fixing Error Codes F13 or F14
Encountering error codes F13 or F14 while operating your Amana washer? It’s a problem with the door lock system. Here’s what to do:
Caution: Wear protective gear when dealing with electronic devices to avoid electrical shocks.
Still no luck? Professional assistance is best.
Fixing Error Codes F15 or F16
If your Amana washer’s displaying error codes F15 or F16, here’re a few solutions to fix the issue.
| Solution | Steps |
|---|---|
| Disconnect the power cord from the outlet | Make sure the door’s closed and latched shut. Check the wiring connections going to the door lock switch and control board for any loose or damaged wires. Replace both the door lock switch and control board in case of damage or wear. Reconnect all wiring components and switch on the power supply before testing. |
If none of these steps work, call a certified technician for further diagnosis of your appliance.
Tackling error codes promptly is essential. They could cause long-term effects on your machine’s performance, resulting in daily inconveniences. If uncertain, always seek professional help. Routinely check washer components like door latch switches & wiring connections – vital for preventing such issues.
By following these steps, you can resolve the problem easily and avoid costly repairs down the line. Even if your Amana washer’s error codes are unfixable, at least you have an excuse to buy new clothes instead of doing laundry.
Conclusion: Dealing with Amana Washer Error Codes
Amana washer error codes can be easily solved. Each code means something different – from a clogged drain to an overfilled machine. Amana has a list of codes and descriptions online that nonprofessionals can understand. Simple issues can be fixed by the user. Complex ones need professional help. Knowing these codes makes it easier to diagnose the problem.
When a code appears, take action right away. Ignoring it could cause more damage or breakdowns. Unplug the machine for a few minutes before restarting it. Check hoses and pipes for blockages. Make sure the load is the right size.
With Amana, the codes and descriptions are easy to understand. People can take care of minor problems without help. Lint removal does not increase the risk of fire. But regular checkups are needed to prevent overheating.
