If you own a Speed Queen washer, you may encounter error codes which could lead to frustration and stress during your laundry routine. In this section, we will explore common error codes that may affect your washer’s performance and how to quickly identify and fix them. You will learn about issues like unlocked doors, open doors, water still in the washer, and difficulty sensing water levels. So, let’s delve into the world of Speed Queen error codes and find swift solutions for your washer’s performance issues.
Er or do: Open Door During Cycle
When you open the door of a Speed Queen washing machine during a cycle, the Er or dL error code will be displayed. Opening the door during a cycle is not advisable, as it might damage the appliance and result in the “Er or dL error code for open door during cycle” message.
Before dealing with this issue, check if there are any other problems with your washer. Make sure all controls are properly set up and wait until the cycle is complete before opening the door.
Remember to follow the proper washing guidelines and avoid opening the door mid-cycle. This will ensure the safety and best performance of your Speed Queen washing machine.
Er or dL: Unlocked Door During Cycle
Got a Speed Queen washing machine and you’re seeing an Er or dL error code during the cycle? Your door might not be properly locked. This could be caused by a broken door locking mechanism or something blocking the door from closing.
Check for anything blocking the door. If not, try restarting the cycle and make sure the door is closed.
Unplug the washer. Look at the door locking mechanism and wiring. If you can’t spot the problem, contact Speed Queen customer service.
Don’t ignore the error! You don’t want water leaking and costly repairs. Take action and get your Speed Queen washer running again!
Er or dr: Water Still in Washer at End of Cycle
Your Speed Queen washing machine may display the error code “Er or dr” during the wash cycle. This means water is still inside the washer. It could be caused by a faulty drain pump or a clogged drain hose. You must identify and fix this issue fast to protect your clothes from water damage.
Act swiftly! Water can cause bad smells, mold, and harm garments. Don’t wait if you see the “Er or dr” error code. Take action to avoid bigger problems.
Er or FL: Washer Hasn’t Reached Fill Level After 30 Minutes
Are you a Speed Queen washing machine owner? If yes, you may get the ‘Er or FL’ error code. This code appears when your washer hasn’t filled up with water in 8 minutes. Reasons could be issues with the hot and cold water faucets, blocked inlet valve screens, and filter screens.
To fix this, do these steps:
- Check the hot & cold water faucets are open
- Examine the fill hoses if there are kinks
- Clean the inlet valve & filter screens
If the code still appears, contact Speed Queen customer service. Ignoring this code for a while may cause serious harm to your machine.
It’s crucial to maintain your washing machine. This will help you avoid the ‘Er or FL’ error code and ensure optimal performance & longevity.
Er or nF: Washer Hasn’t Filled to Proper Water Level
Encounter “Er or nF” Error Code?
It probably means that your Speed Queen Washer hasn’t filled to the right water level. Here are 3 steps to help you fix it:
- Check the hot & cold water faucets for sufficient pressure.
- Make sure hoses are not twisted or blocked. Clean any buildup of debris or minerals.
- Ensure filter screens and valve screens are clean.
If these solutions don’t work, contact Speed Queen Customer Service. This error code can be annoying, but following these instructions should help you solve it fast.
Er or OF: Washer Has Filled to Overflow Level
Er or OF error code? That means the washing machine’s basin is overflowing! So, take action:
- Turn off the washing machine immediately.
- Find the water faucets and turn them off.
- Clear out any clogs in the drain.
- Do a drainage test.
- Contact Speed Queen customer service if these steps don’t help.
Be warned: if this issue isn’t resolved, water damage is likely. To avoid any further damage, follow the steps above and take extra care. If you’re still seeing an Er or OF error code, it’s time to call in the pros!
Er or PS: Trouble Sensing Water Fill Level
If your Speed Queen washer shows an error code of Er or PS, it could mean difficulty sensing the water fill level. This could happen if the pressure switch fails to register the amount of water in the tub.
To fix this, check the water faucets supplying the washing machine. Make sure they’re fully open. And check for kinks in any hoses. Also, look for sediment and mineral buildup in the hot or cold water valves, screens or filters. Clean them if needed.
If these steps don’t solve the issue, you may have to replace certain parts, like the pressure switch or assembly. Make sure to unplug electrical sources before taking off any panels or covers. This is very important for safety.
To sum up, troubleshoot the Er or PS error code by checking for kinks and sediment buildup. If these don’t work, replace parts like pressure switches or assemblies.
Er or dU: Door Will Not Unlock
When you get an ‘Er or dU’ error code on your Speed Queen washing machine, it can be annoying. The door won’t open.
To fix it, first check the door lock system. It may need replacing if it’s faulty.
Next, disconnect the machine from power. Wait 30 seconds, then plug it back in. This might reset the error.
If neither of these works, contact a licensed technician. Trying to fix it yourself might cause more damage, so it’s important to get professional help.
Therefore, an ‘Er or dU’ code means the door isn’t unlocking. Follow the steps above, and contact a technician if needed.
Troubleshooting Speed Queen Washer Error Codes
If you own a Speed Queen washer, encountering error codes can be a frustrating experience. In this section, we will explore troubleshooting tips for Speed Queen washer error codes, including potential causes and solutions to help you get your machine back up and running smoothly. We will cover a variety of common error code issues, from checking your door locks to cleaning water mixing valve screens.
Check the Door Locks Properly
Make sure the door locks properly on the Speed Queen washing machine. To do this:
- Clear obstructions. Before a cycle starts, check nothing is blocking the door lock.
- Look for damage. No obstructions? Inspect the latch or locking mechanism.
- Try again. Restart the machine and see if it locks correctly this time.
- Check power. Check fuses or tripped breakers in the circuit breaker panel.
- Get help. Contact Speed Queen customer service if none of these solutions work.
It’s important to lock the door correctly. This stops water spilling and keeps clothes safe.
If the washing machine still isn’t working, try unplugging and restarting it. Sometimes a reboot helps!
Unplug and Restart the Cycle
When errors strike your Speed Queen washing machine, one way to fix it is to unplug and restart. Turn off power from the switchboard or outlet. Wait 30 seconds. Then, plug it back in and select a cycle on the display. This can work for door locking/unlocking problems and sensor errors.
But, it may not be the answer. Check the drain hoses and faucets. Get advice from Speed Queen customer service.
Don’t believe the rumors. There is no connection between a household hippopotamus and a malfunctioning washing machine. That’s just not true.
Check for Drain Errors
To keep Speed Queen washing machines running smoothly, it’s important to check for drain errors regularly. This helps avoid water overflow, blockages, and other issues that could arise. Here’s how:
- Turn off the machine and unplug it.
- Find the drain hose at the back panel’s center.
- Check for kinks, debris, and obstructions.
- Reconnect all hoses and fixtures.
- Plug it back in and start the wash cycle. This will tell you if you fixed the blockage.
Regularly checking for drain errors is key. It saves time, effort, and money. Plus, look for leaks around tubs or hoses. Leaks can worsen and cause serious damage if not fixed.
If you’ve checked and unclogged everything and still have drain problems, replace the drainage pump.
By following these steps, you can make sure your washing machine runs without a hitch. Also, check your hot and cold water are working before blaming your washer.
Check Hot/Cold Water Faucets and Fill Hoses
To keep your Speed Queen washing machine in good working order, it’s necessary to inspect the hot and cold water faucets and fill hoses. Here’s how:
- Switch off both the hot and cold water sources.
- Unattach the fill hoses from the washer.
- Clean the hose screens with a brush or cotton swab. Rinse with warm water to get rid of any debris. Also, look out for any signs of damage on the hoses before reattaching them to the washer.
Be careful not to over-tighten when reattaching hoses. This could cause leaks during washing.
Check if the hot and cold water faucets are giving out enough water. If either one is faulty, contact a plumber straight away. This may impede the machine’s cleaning efficiency and even cause more serious problems.
If you still have problems after inspecting these components, read our article on troubleshooting Speed Queen Washer Error Codes or contact our customer service team. Regular maintenance checks are essential for optimal performance from your Speed Queen washing machine.
Clean Water Mixing Valve Screens and Filter Screens
Check and clean water mixing valve and filter screens often. Without this, sediment can build up, blocking the water flow and causing error codes. This can ruin your washing machine and cost you dearly. Clean the screens and valves regularly to prevent problems. If your Speed Queen washing machine still has issues, contact customer support. They can help diagnose the problem over the phone or arrange a service appointment. That way, you get reliable performance from your washing machine.
Contacting Speed Queen Customer Service
Are you encountering error codes on your Speed Queen washer? Do not worry! This section will provide information on how to contact Speed Queen’s customer service team and troubleshoot the problem. It includes customer service contact details and various ways they can provide assistance if the issue cannot be fixed at home. With their professional assistance, you can get your washer back up and running in no time.
Getting Assistance if the Issue Persists or Cannot be Fixed at Home
Having trouble with your Speed Queen washer? Need help? Consult the user manual that came with the machine for customer service contact info. When you get in touch, explain the error code & what steps you’ve taken to try & fix the issue. Include other details too, like what noises/behaviour you’ve noticed & how long the problem’s been going on.
Customer service may send a technician to repair your machine on-site if needed. To avoid repairs, follow the maintenance & usage instructions provided by Speed Queen. Their machines are tested to last 25 years with commercial-grade performance in the average home.
Conclusion
So, comprehending Speed Queen washer error codes is paramount for users. Knowing the significance of these codes, users can quickly sort out simpler issues on their own. Nevertheless, some error codes may point to major difficulties that need professional attention. Thus, it is necessary to consult the machine’s manual and seek expert help if needed. Plus, regular cleaning and maintenance will avoid error codes and guarantee optimal operation.
FAQs about Speed Queen Washer Error Codes
What is the ‘Fix App’ mentioned in the reference data?
The Fix App is a mobile application that allows users to manage their belongings in one place. Users can snap a photo and the app will store user manuals, receipts, and product information, making it easy to find stored information.
How long can Speed Queen washing machines last?
Speed Queen washing machines are durable and can last up to 25 years.
What do the error codes for Speed Queen front load washing machines indicate?
The error codes for Speed Queen front load washing machines may appear as a combination of letters or blinking lights and indicate specific issues. Common error codes include Er, do (door opened during cycle), Er, dL (door unlocked during cycle), Er, dr (drain error), Er, FL (washer hasn’t reached fill level after 30 minutes), Er, nF (washer hasn’t filled to proper water level), Er, OF (washer has filled to overflow level), Er, PS (trouble sensing water fill level), and Er, dU (door will not unlock).
How can I fix an error code indicating an open door during a cycle (code Er or do)?
If an error code indicating an open door during a cycle (code Er or do) appears, turn off the machine and unplug it for 15 seconds to clear the code.
What should I do if I am unable to clear an error code by unplugging the machine for 15 seconds?
If an error code cannot be cleared by unplugging the machine for 15 seconds, clean any foreign object traps in the pump and check for drain errors. If the issue persists, contact Speed Queen customer service for assistance.
How can I troubleshoot an error code indicating an unlocked door during a cycle (code Er or dL)?
If an error code indicating an unlocked door during a cycle (code Er or dL) appears, turn off the machine and unplug it for 15 seconds to clear the code. Check that the door is properly locked and restart the cycle.
What should I do if an error code indicates a water-related issue (code Er or dr, Er or FL, Er or nF, or Er or OF)?
If an error code indicates a water-related issue (code Er or dr, Er or FL, Er or nF, or Er or OF), check hot/cold water faucets and fill hoses, clean water mixing valve screens and filter screens, and unplug the machine for 15 seconds to clear the code. If the issue persists, clean any foreign object traps in the pump and check for drain errors. Contact Speed Queen customer service for assistance if necessary.
